top
ULTRASONIC
ULTRASONIC
  1. ULTRASONIC

Functions:

(1) Soften thrombus, and eliminate red face

It applies ultrasonic; applies pulse therapy, combined with proper ointment for

activating blood circulation, correcting the deformed capillaries to eliminate red

face.

(2) Remove acne scars

Ultrasonic can penetrate into the skin. It can dissolve the dried blood on the

skin, and strengthen the blood circulation and metabolism, making the spots

vanish faster. It should be used with acne cream every other day. Ten times for

a course of treatment.

(3) Eliminate the skin pigment abnormity

Combining with facial cream of traditional Chinese medicine and Vitamin C can

be quickly effective and help completely vanish. It begins to take effect after

three times, and eliminate the skin pigment abnormity after 10-40 times.

(4) Dissolve skin pigment and remove subcutaneous spots.

Ultrasonic can damage the intracellular membrane of pigment cells, preventing

them from forming, dissolving pigment, and making them vanished along with

the metabolism. Ten times for a course of treatment, with seven days interval

between 2 courses.

(5) Reduce wrinkles, remove blood stasis and lift face

Ultrasonic massage can adjust the cell membrane of subcutaneous cells and

strengthen blood circulation and metabolism, which makes the tiny wrinkle,

blood stasis and lumps vanish.

(6) Eliminate eye bags & dark circles

Ultrasonic massage can promote the blood circulation and lymph circulation;

combined with thermal effect, it can also dissolve fat, accelerate absorption and

dissipate excessive water and fat, which can eliminate eye bags and dark

circles. Please gently massage along the skin texture for 5 minutes for each eye

bag. Do not aim at the eye ball.

Notice:

(1) Please clean the face (or affected parts) before using ultrasonic

(2) It is better to apply viscous ointment so the working head can match the skin

well, promoting the absorption. To avoid burning out the working head, please

apply sufficient ointment to the skin.

(3) Proper working time of ultrasonic should be 30 minutes. It will not enhance

the effect if prolong the using time.

(4) To deal with tiny parts, please use mini probe and reduce the using time to

8-10 minutes.

(5) The probe must not get close to or contact the eyes.

(6) It is not allowed that no operation is performed while the ultrasonic probe is

working; otherwise, the working head will be overheated and burn out. And the

working time should not exceed 30 minutes.

THE FEATURES OF ULTRASONIC

  1. Ultrasonic cosmetologyis famous for its wide range of treatment, quick effect,

high cure rate and simple operation. It has three main functions:

(1) mechanical action: it can soften tissue, strengthenpenetration, promote me-

tabolism and blood circulation, and stimulate nervous system and cells.

(2) thermal effect: it can promote vascular function and metabolism, strengthen

blood circulation, ease the pain by reducing neural excitation, relax the skin and

have the effect of spasmolysis.

(3) chemical action: ultrasonic can strengthen catalysis and promote metabo-

lism. It can make the PH change towards alkaline, and promote the bactericidal

ability of the drug.

Operations:

(1) Turn on the power switch, and operate in accordance with the “Illustration of

Instrument panel”.

(2) Press button 7 “On”. When the indicator lights up, ultrasonic begins to work.

Press button 1 and 2 to adjust the intensity.

(3) Press button 3 and 4 to set the working time

(4) Press button 5 to switch working modes.

  1. Galvanic

Functions:

applying the principle of the mutual attraction between positive and negative

charges, the equipment can lead out the dirt of pores, precipitated pigment

and metallic ion of makeups. Also, it can lead in nutrition and medicament.

Operations:

(1) Ask the customers to hold the conductive metal bar

(2) Take a piece of cotton pad, dip it in the leading-out liquid and clip it on the

roller. Apply another half of the liquid on the customer’s face.

(3) Place the sponge of clamp on the forehead and adjust the electric current.

Choose “Lead-in” mode. It takes 4-6 minutes.

(4) Replace the cotton pad with a new one, choose “Lead-in” mode and repeat

the steps in leading out process with leading-in liquid.

(5) Turn on the power switch, and operate in accordance with the “Illustration

of Instrument panel”.

 

(6) Plug corresponding accessories in the outlet.

(7) Press button 17 “On”. When the indicator lights up, it begins to work. Press

button 14 to adjust the intensity. Press button 16 to choose working mode. “+”

stands for lead-out mode and “-” stands for lead-in mode.

Notice:

(1) Apply leading-in or leading-out liquid according to its instruction if there is

any.

(2) The end of the clamp cannot be exposed in case the current concentration

makes the customer feel uncomfortable.

(3) When performing facial care treatment, please use a current of 1MA.

(4) Ask the customer to take off metal objects on him/her in case the current

concentration makes the customer feel uncomfortable.

(5) It is natural that the customer feels stimulation.

(6) For sensitive skin, perform another leading-in process with distilled water to

make the skin resilience.

  1. DERMABRASION

Functions:

applying mechanical message, it can completely remove dirt and corneum of

the body. It can also massage, making the customer feel refreshing and pre-

paring for later cosmetology.

Operations:

(1) Please clean the skin requiring treatment with distilled water.

(2) Turn on the power switch, and operate in accordance with the “Illustration

of Instrument panel”.

(3) Connect the dermabrasion device to the outlet

(4) Press button 8 “On”. When the indicator lights up, it begins to work. Press

button 9 and 10 to adjust the intensity.

Notice:

Do not use in bathroom. Do not pour water into the device.

 

  1. SPOT REMOVAL

Functions:

Utilizing high frequency current produced by computer system, it can remove

freckles, age spots, flat nevus etc. It is effective and safe without bleeding and

pain, and it has no side effects.

(1) Spots removal: slightly move electric acupuncture on the spot, and the mela-

nin will become dark and come off. If the spot is shallow and small, it can be

remove at once; if the spot is large and deep, it needs 2 or 3 times. When the

beautician is using the electropuncture, the customer should keep still and the

beautician should keep his/her hands balanced to avoid being burnt, influencing

recovery and leaving scars.

(2) Mole removal: pay particular attention to the depth of mole. Some moles are

on the skin surface while some are deep in the skin. Do not cut the surface of

moles at one time. And it is better to burn off in square form. For the deep mole,

besides avoiding inflammation, it is better to apply nourishing cream to activate

cells 2-3 days before recovery. Do not apply cream if there is inflammation.

(3) Granulation removal: slightly contact the root of granulation with the end of

electropuncture. And burn the root cells with laser electropuncture and the gran-

ulation will come off naturally after a week.

(4) Tattoo removal: if the tattoo is large, use electropuncture No.3. The way of

removing tattoo is similar to that of removing spot, but it takes longer and must

be used constantly. Large tattoo (larger than 3cm) should take several times to

be removed. Do not remove at one time; otherwise, it will be infected. Please go

to hospital if there is inflammation.

Operations:

(1) Turn on the power switch, and operate in accordance with the “Illustration of

Instrument panel”.

(2) Press button 13 “On”. When the indicator lights up, it begins to work. Press

button 12 to adjust the intensity.

(3) Adjust the intensity to minimum and test whether there is current.

(4) Communicate with the customer to adjust the intensity and electricity cur-

rent.

(5) The electricity should be appropriate. If it is strong, the device will be burnt;

if it is weak, the working time will be influenced.

Notice:

(1) Beautician should clean and sterilize hands before wearing sterile gloves.

(2) Clean and sterilize the skin requiring treatment with alcohol.

(3) Beautician should wipe the skin with anesthetic for 3 minutes before remov-

ing spots.

(4) Turn on the power switch, and operate in accordance with the “Illustration of

Instrument panel”.

 

  1. HIGH FREQUENCY ELECTROTHERAPY

Functions:

(1) Irradiating with special ultraviolet rays, this device can kill bacteria, acceler-

ate the healing of intermittent skin wound.

(2) Remove facial spot, pimples and treat spots.

Operation:

(1) Connect the wire to the socket.

(2) Insert the UV glass tube into the electrotherapy stick.

(3) Turn on the power switch, and operate in accordance with the “Illustration of

Instrument panel”.

(4) Press button 20 “On”. When the indicator lights up, it begins to work. Press

button 18 and 19 to adjust the power the customer requires.

Notice:

(1) The UV glass tube should be kept dry and clean

(2) Do not apply electrotherapy to the same part too long so as not to leave

scars.

(3) Take off the customer’s metal accessories before performing electrotherapy

in case any accident happens.

  1. VACUUM AND SPRAY

Functions:

(1) Cleanse the skin by eliminating the blackheads, grease and dirt with pipet.

(2) Evenly spray lotion, nutrition and solution on the skin with sprayer.

Operations:

(1) Connect the accessories (sprayer, pipet) suited for the customer to the cor-

responding sockets.

(2) Turn on the power switch, and operate in accordance with the “Illustration of

Instrument panel”.

(3) Press button 23 “On”. When the indicator lights up, the pump begins to work.

(4) Connect the glass to the pipet, press the small hole of glass tube to vacuum

or spray.

(5) Connect the sprayer to the soft tube, and press the upper hole with thumb to

spray lotion.

Notice:

(1) Please adjust the pressure knob behind the equipment to adjust the suction

until the customer is satisfied.

(2) Please adjust the pressure knob to the minimum first, and increase the pres-

sure gradually in case the treated part is pulled.

 

  1. BREAST ENLARGEMENT

Functions:

Employing vacuum theory, the device is frequency-modulated. It promotes fat

granule and liquid to get into breast tissue cells through regular rhythm, renew-

ing breast tissue, enlarging and shaping breasts. Vacuum pressure can also

promote partial blood circulation of the skin, accelerating the absorption of fat

granule and nutrients and fully meeting the demand of metabolism of breast

tissues.

Operations:

(1) Connect the cup suited for the customer to the socket with a Y-pipe.

(2) Turn on the power switch, and operate in accordance with the “Illustration of

Instrument panel”.

(3) Press button 23 “On”. When the indicator lights up, the pump begins to work.

Press button 21 and 22 to adjust the absorbing and desorbing rhythm of the

cup.

Notice:

(1) Please adjust the pressure knob behind the equipment to adjust the suction

until the customer is satisfied.

(2) Please adjust the pressure knob to the minimum first, and increase the pres-

sure gradually in case the breasts are pulled.

 

  1. MAGNIFYING LAMP

Functions:

This lamp is used to magnify and exam the skin with UV. It can exam subtle

changes of human skin, and helps keep the skin smooth and elastic through

immediate treatment and maintenance.

Operations:

(1) Connect the power plug of the lamp on the back of this equipment, and ask

the customer to sit under the bracket.

(2) Turn on the power switch. Aim the magnifying lens at the skin requiring

examination.

(3) Adjust the distance between lamp and skin to make it clear to check.

(4) Exam the skin carefully

Notice:

(1) Cleanse the surface of skin before examination

(2) Please turn off the switch in time after examination

(3) Please cover the lamp with lampshade if it will not be used for a long time.

Picture:

  1. WOODS LAMP

Functions:

This lamp is equipped with high light circular tube and new startup circuit. Turn

on the power and it will light up immediately. The lampshade can resist interfer-

ence of outside lights, making the operation more professional and clear. It can

also be used to exam and analyze the skin, and thus care and treat problem

skin, helping the skin recover luster and elasticity.

Operations:

(1) Connect the power plug of the lamp on the back of this equipment, and cover

the lampshade on it with the lampshade hanging down naturally.

(2) Turn on the power and device, and cover the skin with the lamp. Adjust it to

the best angle to observe.

Skin condition

(1) light blue---------healthy skin

(2) white plume-------aging skin

(3) light purple--------inflammatory or sensitive skin

(4) dark brown---------skin pigmentation

(5) blue and purple----------dry skin

(6) orange-----------------greasy skin

(7) light yellow------------festering skin

Notice:

Sometimes tiny spots can be observed during the operation. They are makeup

or air particle, which will disappear after cleansing.

 

  1. MIST SPRAYER

Functions:

(1) This equipment (No. F-999) has a super thin body, brand-new design, flexi-

ble sprayer rocker, and unbreakable heat-resistant bottles. The working time of

heating tube is set by computer chip. The multifunctional beauty equipment is a

great breakthrough.

(2) Ionizing vapor contains rich reactive gases, which can promote blood circu-

lation and complement moisture. It is very effective in killing bacteria on the skin,

cleansing and nourishing skin.

(3) Coordinating with proper medicament, it can help treating pimples and dull

spots, telangiectasia and inflammation. It can also bleach and nourish skin.

(4) It is equipped with latest unshakable bottles, which is super intense, odor-

less, tasteless, nonpoisonous, heat-resistant and capacious.

(5) It is equipped with unique grooves for essential oil to improve the indoor air

with essential oil of different effects.

Operations:

(1) Add pure distilled water in the container.

(2) Connect the power plug to the corresponding power source.

(3) Switch on the power. The machine is preparing after a “Doo”.

(4) If you need warm mist, please add water to the highest level mark. Press

“VAPOR” button and the green light will be on. The heating wire begins to heat

up, and the warm mist will be sprayed out after a while. If you need ozone,

please press “OZONE” button. When the green light is on, you can see the mist

will increase. When the water is boiled to the lowest level mark, the thermostat

will be disconnected, and the device will stop heating.

(5) Open the basket and put traditional Chinese medicine, flower or ice cubes

into the basket to achieve all kinds of cosmetic effect.

(6) Spray nozzle can rotate in 120 degrees direction.

Notice:

(1) Must turn off the power switch and pull the power plug if there is no water in

  1. Do not power on the main machine if the water level is too high or too low.

Users should be responsible for the accident caused by that.

(2) When taking out the host header, do not power on the machine if there is no

water in the bottle.

(3) Do not open the lip of water inlet when performing warm spray in case of

scald.

(4) If the water is at the lowest level, do not power on the machine in case it is

burnt.

(5) Please read the manual carefully before operation or operate under the guid-

ance of professionals.

(6) Keep the machine away from children. And when it is working or within an

hour after it stops, do not let children get close to it.

ILLUSTRATION OF MIST SPRAYER PANEL

  1. Power on/off
  2. Sterilization
  3. Heating switch
  4. Time increase
  5. Time reduction
  6. Working time display

Operations:

  1. Switch on the power
  2. The machine is preparing after a “Doo”.
  3. Press the “Power” button. Red light is on and the time display shows 30. The

machine starts, and the second point flashes.

  1. If youneed warm mist, please add water to the highest level mark. Press

“VAPOR” button and the green light will be on. The heating wire begins to heat

up, and the warm mist will be sprayed out after a while. If you need ozone,

please press “OZONE” button. When the green light is on, you can see the mist

will increase. When the water is boiled to the lowest level mark, the thermostat

will be disconnected, and the device will stop heating. When the time runs out,

the entire machine will stop working.

Notice:

  1. Do not put oil substance or particles into the bottle to avoid spattering.
  2. Do not directly spray on the customer’s face in case he/she is burnt.
  3. Do not power on the machine when there is no water in case the heating

device is burnt.

  1. The bottle is high-temperature during the operation; please do not touch it in

case any burning accident happens.

Leave a Reply

Your email address will not be published. Required fields are marked *