top
Ultrasonic Beauty Instrument
Ultrasonic Beauty Instrument

Matters needing attention

 

  1. To move this instrument, it is necessary to lift it up and put it down gently; in case of the failure, please do not knock hard on it so as to prevent malfunction caused by the impact.
  2. To move this instrument, it t is necessary to keep it horizontal so as to avoid vibration and impact.
  3. Do not squeeze the instrument body and do not place the heavy stuff onto the instrument body so as to prevent shell deformation, damage or malfunction.
  4. It is necessary to select the corresponding working power supply in accordance with the marks on the instrument body.
  5. It is not allowed to use this instrument in the bathroom.
  6. To prevent the lightning accident, when it thunders, please show down the power switch and pull out the power plug.
  7. It is not allowed to inject any fluid into the instrument body so as to prevent the instrument from being damaged due to the short circuit.
  8. If the instrument will not be used for a long time, it is necessary to pull out the power plug from the socket.
  9. When the instrument is at work, it is not allowed to parch the ultrasonic head so as not to burn out the ultrasonic head and not to scald the customer due to the over-high temperature!

 

 

Technical parameters

  1. Operating voltage:As label on themachine
  2. Maximum power of the complete machine 15W
  3. Ultrasonic frequency 1-1.1MHZ
  4. Packing size 27* 10*27(L*W*D) cm
  5. Gross weight: 1.5Kg
  6. Net weight: 1.35Kg

VERSION: 20090808 USER MANUAL

Contents

Overview for function mechanism of the Ultrasonic Beauty Instrument……………1
Treatment and beautifying function of the Ultrasonic Beauty Instrument ……… 1
Treatment dose and waveform selection of the Ultrasonic Beauty Instrument …… 3
Graphical representation of the operation panel ………… ……………………… 3
Steps of the ultrasonic beautifying method………………………………………… 4
Matters needing attention ………………………………………………………… …4
Technical indexes of the comprehensive beauty instrument…………………………5
Notice for use…………………………………………………………………………6

  1. Generally, the optimal time to use the ultrasonic wave will be 15 minutes; to prolong the time will not increase the effect.
  2. To process the part with a small scope, please use the small probe and reduce the use time accordingly, which appropriately shall last for 8-10 minutes.
  3. Please keep the ultrasonic wave away from the eyes so as to prevent the eye contact.
  4. Do remember that when the ultrasonic wave is at work (more than 15 minutes) to output the ultrasonic energy, there shall be beautifying operation conducted so as not to damage the instrument due to the overheating of the ultrasonic wave.

 

Technical indexes of the comprehensive beauty instrument

 

The ultrasonic frequency of this instrument is ±10% of 1MHz; scope:1-30 minutes (one-minute stepping, adjustable); the number of the display stages for the single-step adjustment power output is 10,specifically, three stages for green, three stages for yellow, and four stages for red;

Output power: 0-15W, adjustable;

Pulse output modulation frequency: 4Hz;

Output voltage: 110V/220V (adjusted by the power transfer switch behind the instrument body), 50-60Hz

Power of supply<40W;

Notice for use

Dear customers;
We appreciate your order this product! Please go though this manual before use in order to ensure the maximum performance of the instrument and the safety in use. Please keep properly for further requires

Ø1.It is not allowed to be used for the pregnant women;

Ø2.It is not allowed to be used for the cardiac patients;

Ø3.It isnot allowed to be used for the hypertensive patients;

Ø4.It is not allowed to be used for the patients Sufferinginternal injuries;

Ø5.It is not allowed to beused for the patients suffering skin diseases;

Ø6.It is not allowed to be used for the people withopenwounds on the treatment parts.

1.Power button 2.Waveform mode selectiom button 3.Handle mode selection mode

4.Increase of power 5.Decrease of power 6.Increase of time 7.Decrease of time

 

Steps of the ultrasonic beautifying method

1.Beforethe application of the ultrasonic instrument, it is necessary to clean thefacial skin with the appropriate facial cleanser;

2.Afterthe facial cleanser has been wiped out, it is necessary to steam the face withthe spray device for 10 minutes;

3.Clearout the facial blackhead, acne, etc;

4.Gentlypat the appropriate shrinkage water on each part of the face;

5.Gentlywipe out the shrinkage water;

6.Clearlyanalyze the skin nature and the problem to be dealt with, and then select the most suitable ointment.

7.Applythe selected ointment on the face properly and evenly;

8.Switchon the power and select an appropriate output socket to connect with the ultrasonic probe;

9.Adjustthe power size (ENERGY) according to the power switch (START);

10.Adjust the timeappropriately, which generally will be 15 minutes;

11.Select the handle (SELECT)mode, that is, round head () or sharp head () according to the need; waveform(STATE)-“continuous wave () or impulse wave ()”;

12.Massage the skin applied with ointment with the probe;

13.After the ultrasonic wavetreatment has been finished, it is necessary to clean the probe;

14.If the appropriateChinesetraditional medicine powder is selected, the skin will become fresh andpleasant.

Matters needing attention:

1.Before the ultrasonic wave treatment, it is necessary to clean the face (or the affected part);

2.The applied medicine shall have a certain viscosity so that the ultrasonic working head can be perfectly combined with the skin, which is conducive to the skin absorption; meanwhile, to prevent the ultrasonic working head from being burnt out, it is necessary apply enough medicine on the skin.

Overview for function mechanism of

the Ultrasonic Beauty Instrument

 

Since the introduction of the ultrasonic beauty instrument technology in the 80s, due to the wide treatment range, quick effect, high curative rate and easy operation, it has got a wide attention, popularization and promotion, which has made it become the most practical and popular equipment among so many beautifying devices. Specifically, its functions mainly lie in three aspects:

  1. Mechanical function

The mechanical function of the ultrasonic wave lies in the functions to soften the tissue, enhance the penetration, improve the metabolism, facilitate the blood circulation and stimulate the nervous system & cell.

  1. Warming function

The warming function of the ultrasonic wave can cause the changes of the blood vessel function and metabolic process, can strengthen the blood circulation to lower down the exciting point of the nerve, can produce the analgesic effect, as well as can relax the spastic skin and play the spasmolytic

effect.

Chemical function

The ultrasonic wave is featured by the functions to strengthen the catalysis and accelerate the metabolism, which can change the PH value towards the alkalinity and facilitate the medicine to permeate into the bacteria so as to improve the medicine’s sterilization ability.

Treatment and beautifying function of the Ultrasonic Beauty Instrument

1.The ultrasonic medicine penetration treatment function is characterized with the following features:

(1) The medicine is not limited to ionization material and water soluble substance so that the medicine source is broad;

(2) Compared with the pure ointment application, the ultrasonic medicine penetration can be absorbed more and deeper;

(3) The medicine concentration is not limited by the dissociation degree, etc;

(4) There is no such problem as impact strength and polarization of practice;

(5) There is no such phenomenon as electrical stimulation so that the accident of electric injury will not happen;

(6) It is easy and simple to handle; meanwhile, the applied medicine shall have a certain viscosity.

  1. Beautifying function of the ultrasonic wave

(1) Softening the blood clot and eliminate the “red face”:

To combine the ultrasonic pulse treatment with the appropriate ointment for promoting blood circulation to remove blood stasis can rectify the deformed imperceptible blood vessels and make them return to normal thus to eliminate the red face.

(2) Eliminate the scar left by the healed acne

Because the ultrasonic wave can penetrate the skin, which not only can dissolve the dry blood oozed into the skin, but also can strengthen the blood circulation and metabolism, it can make the color print fade away faster; generally, the treatment combined with the ultrasonic wave and the acne cream shall be carried out once every other day and ten times will be one course of treatment.

(3) Eliminate the skin pigmentation disorder

To combine the ultrasonic wave with the Chinese traditional medicine cream or freckle cream and the high-unit vitamin C will produce effect quickly and thoroughly eliminate the skin pigmentation disorder; specifically, the treatment with ultrasonic wave applied will produce the desired result in

three times and 10-40 times of treatment will eliminate it.

(4) Dissolve the pigment to eliminate the subcutaneous plaque

The practice will be calculated by the course of treatment and ten times will be one course of treatment, among which one shall take a rest for seven days; the uniqueness shall be credited to the fact that the ultrasonic impact can destroy the inner membrane of the pigmentation cell to prevent its formation and dissolve the pigment so as to make the pigment disappear completely with the metabolism.

(5) Remove wrinkle, remove blood stasis and conduct face lift

To apply the mechanical massage function of the ultrasonic wave, for one thing, it can adjust the change of the subcutaneous cell to go through the cell membrane; for the other thing, it can strengthen the blood circulation and metabolism; therefore, it can make the wrinkle fade away gradually and even can thoroughly eliminate the blood lump generated for being bruised by the hard object.

(6) Remove eye bags and dark circles

Due to the mechanical massage function of the ultrasonic beauty instrument, it can accelerate the blood and lymph circulation; furthermore, with the thermal effect, it can dissolve fat and accelerate skin absorption to dissipate the excessively accumulated water and fat and thus to remove the eye bags and dark circles. Use the small head of the ultrasonic beauty instrument to carry out the massage along the skin texture: five minutes for each eye bag once; the applied force shall be gentle; and the ultrasonic head shall not be directed at the direction of eye.

(7) Soften hard mass for defatting and acne treatment

Combine the ultrasonic beauty instrument with the acne pathogenic fire reduction ointment to gently massage the acne gently about one minute, which can heal the acne and avoid the formation of the resulting scar at the same time.

(8) skin sclerosis and snake skin pathosis

Combine the ultrasonic beauty instrument with the glycerol and take the liquid paraffin or high-grade emollient to carry out the massage therapy can quickly improve the symptoms.

(9) Conduct massage frequently to improve skin quality

To use the ultrasonic beauty instrument to carry out properly processing can eliminate patch and acne quickly, as well as can improve or restore the skin quality.

 

Treatment dose and waveform selection of the Ultrasonic Beauty Instrument

  1. The dosage of the ultrasonic beauty treatment includes ultrasonic intensity, treatment duration, treatment times, repeated application regularity, treatment course, and other factors.
  2. The dosage intensity shall be better at 0.5W/cm2-1.25W cm2.
  3. Dosage time generally will be 5-15 minutes for the whole face; enlarged dosage or prolonged time will not increase effect.
  4. The treatment course shall be determined by the patient's condition: specifically, 3-5 times will be required for acne; as for the chronic diseases, such as: chloasma, scar, eye bag, dark circle, etc, 10 times will be one course of treatment, which shall be conducted every other day. For the sake of safety, one to two times can be conducted a week. In case of the deterioration for some individual diseases after 2-3 times of treatment, the intensity can be lowered down and the treatment interval time can be extended appropriately: the interval for the course of treatment shall be 1-2 weeks; meanwhile, if 3-4 courses of treatment are required, after the second one, if the blood capillary is expanded, the pulse wave shall be selected. The restfollow the “Steps of the ultrasonic beautifying method”.

 

Graphical representation of the operation panel

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *