Sterilizer Manual


“RADIUM”™ sterilizer is a new high-tech product applying for the import microcomputer control temperature system, coming with the over heat protest equipment and automatical keep temperature system. Once start to work, auto-rise temperature, and when the temp.of inner kernel reaches or be near the set temperature, the program will be on the heat preservation state; when the temperature of inner kernel is under the set temperature, the system will raise temperature automatically.


  1. Inst ruction:
    1. Put the sterilizer on a table or a stable and safe place.
    2. Insert the plug into the outlet and keep touch well.
    3. Put the clean wet towel on the shelf regularly and into the sterilizer, close the door and press the power ON/OFF, accordingly the indicators becomes light and the machine is on work.
    4. When reach or be near the set temp., the indicator is still light but the program into the heat preservation state; when under the set temp., the auto-raise temp.system begins to work.

  1. Caution:
  2. When start the machine, not reach the set temp., not to open the door to avoid influence the sterilizer work effect.
  3. Should clip out the hot towel and not with hand directly to avoid burn.
  4. Always pull out the plug before clean machine.

Often check the deposit water box to spill out the spare water.

Leave a Reply

Your email address will not be published. Required fields are marked *