top
Skin care beauty instrument of Q Ball series
Skin care beauty instrument of Q Ball series

Dear users

Thanks for your purchase of this product. In order to ensure the best performance and safety, please read the following instructions carefully. Please read this manual carefully before connecting or operating this product, and keep it properly for future reference.

Thank you very much for using our company's products. Please read the instructions for different configurations carefully before operation. This series of products have functions of cleansing skin, moisturizing, slimming physiotherapy, etc., mainly for blackhead suction, oxygen injection and spray, negative pressure red light RF, six-pole red light RF and negative pressure heating, coupled with micro-electric heating brush, 40K vortex fat explosion, meeting various needs.

Q-001 Moisture & oxygen instrument

Working principle:

  1. Plug the DC12V adapter power supply and turn on the power switch;
  2. The light around the panel is on, indicating that the instrument has worked.
  3. Insert one end of the transparent tube into, connect the other end to the spray gun. Put the essence into the spray gun bottle, it can be used normally.
  4. After the instrument is used, please turn off the power in time and clean the product.

Diagram of the operation panel

Q-002 2 in 1 beauty equipment

Working principle:

  1. Plug the DC12V adapter power supply and turn on the power switch;
  2. The light around the panel is on, indicating that the instrument has worked.
  3. The suction function is equipped with a suction pen and three different shapes of suction pen heads (it is recommended to clean and disinfect the product after use). Various suction heads are beneficial to the operation and use of different parts. Hold the small hole on the suction pen when using, and loosen it after use.
  4. Please insert the suction and spray tubes into the corresponding ports. The suction and spray tubes must be used in a fixed manner, and should not be used alternately;
  5. The suction function must be equipped with a filter. The filter should be removed for cleaning in time to avoid affecting the service life of the air pump;
  6. For spray-gun function, insert one end of the transparent tube into, and connect the other end to the spray gun. Put the essence into the spray gun bottle, it can be used normally.
  7. Adjust the negative pressure according to your needs.
  8. After the instrument is used, please turn off the power in time and clean the product.

Diagram of operation panel

Q-010 Magic slimming shaping instrument

Working principle:

  1. Plug the DC24V adapter power supplyand turn on the power switch, the panel ambient light is on;
  2. Press the power button, the decimal point of the digital tube flashes, the instrument works. displays and adjusts the working time. The start-up time is 30 minutes by default. The working time can be adjusted from 1 to 60 minutes;
  3. For RF output energy adjustment, the start-up gear is 1 by default, and it can be adjusted from 1-9 gears;
  4. There are three modes for negative pressure mode adjustment. Press to switch different modes,M1: long suction; M2 suction for 3S and release for 1S; M3 suction for 2.5S and release for 1.5S. The start-up is M1 mode by default
  5. Adjust the negative pressure as needed.
  6. After the instrument is used, please turn off the power in time and clean the product.

Diagram of the operation panel

Q-011 RF slimming machine

 

Working principle:

  1. Plug the DC24V adapter power supply and turn on the power switch, the panel ambient light is on;
  2. Press the power button, the decimal point of the digital tube flashes, the instrument work
  3. displays adjust the working time. The start-up time is 30 minutes by default. The working time can be adjusted from 1 to 60 minutes;
  4. For output energy adjustment, the start-up gear is 1 by default, and it can be adjusted from1-9 gears;
  5. After the instrument is used, please turn off the power in time and clean the product.


Diagram of the operation panel

 

Q-012 40k cavitation slimming machine

Working principle:

  1. Plug the DC24V adapter power supply and turn on the power switch, the panel ambient light is on;
  2. Press the power button and the red light is on, the instrument works; Press 5 times continuously within 2 seconds to enter 40K frequency modulation. The Time adjustment box displays the current frequency range. Press of to adjust the matching frequency. After determining the frequency, press to return to normal operation and save the current optimal frequency;
  3. displays and adjusts the working time. The start-up time is 30 minutes by default. The working time can be adjusted from 1 to 60 minutes;
  4. For 40Koutput energy adjustment, the start-up gear is 1 by default, and it can be adjusted from1-9 gears;
  5. There are three modes for 40K mode adjustment. Press to switch different modes, M1 suction for 0.5S and release for 0.5S; M2 suction for 1S and release for 1S; M3 suction for 2S and release for 1S. The start-up is M1 mode by default.
  1. Adjusting valve, which can adjust the negative pressure.
  2. After the instrument is used, please turn off the power in time and clean the product.

 

Diagram of operation panel

Q-020 Magic slimming shaping instrument

Working principle:

  1. Plug the DC12Vadapter power supply and turn on the power switch, the panel ambient light is on;
  2. Press the power button, the decimal point of the digital tube flashes, the instrument works.

3 displays and adjusts the working time. The start-up time is 30 minutes by default. The working time can be adjusted from 1 to 60 minutes;

  1. For heating intensity adjustment, the start-up gear is 1 by default, and it can be adjusted from1-9 gears;The heating intensity is the rate of heating. When it reaches the maximum temperature of 55 degrees, the heating will be automatically disconnected, and it will keep working at 55 degrees.
  2. 5. There are three modes for negative pressure mode adjustment. Press to switch different modesin turn; the start-up is M1 mode by default. M1: long suction; M2 suction for 3S and release for 1S; M3 suction for 2.5S and release for 1.5S.
  3. 6. Adjusting valve, whichcan adjust the negative pressure.
  4. 7. After the instrument is used, please turn off the power in time and clean the product.

 

 

Diagram of operation panel

Q-021 Multipolar BIO beauty machine

Working principle:

  1. Plug the DC24V adapter power supply and turn on the power switch, the panel ambient light is on;
  2. 2. Press the power button and the red light is on, the instrument works;
  3. 3. displays and adjusts the working time. The start-up time is 30 minutes by default. The working time can be adjusted from 1 to 60 minutes;
  4. 4. For micro-electric energy adjustment, the start-up gear is 1 by default, and it can be adjusted from1-9 gears;
  5. 5. Micro-electric mode adjustment;

6、After the instrument is used, please turn off the power in time and clean the product.

Diagram of the operation panel

Maintenance record

This product can exert its high performance under normal use and good conditions, and warranty service is provided for this product.

  1. Please fill content in the warranty card and the stub in detail and affix the dealer’s seal when purchasing, and send the stub to the headquarters as the warranty voucher.
  2. In case of any failures caused by the product’s own quality under normal use conditions within three months from the date of purchase, you will get free warranty services. Free repairs will be provided within 6-12 months, but materials expenses for repairs will be charged. Repairs will be provided for more than one year, but the cost of labor and material expenses for repairs will be charged.
  3. The free warranty services do not include missing accessories, auxiliary devices, transportation fees, and door-to-door service fees of maintenance personnel.
  4. At the time of maintenance, this term is valid only when the warranty card is consistent with the valid purchase certificate.
  5. The free services cannot be provided in the following situations:
  6. Damages caused by errors, negligent use, or accidents.
  7. Damages caused by natural disasters and abnormal voltage.
  8. The users disassemble and repair the product without authorization.
  9. Please contact the transportation department for the damages caused by transportation.

* If your need to repair the product, please contact the purchaser.

Leave a Reply

Your email address will not be published. Required fields are marked *