1. Galvanic
  2. Function:
    1. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
    2. Nourish skin and improve skin conditions


  1. Instruction Procedures:
    1. Put the negative iron bar into the hand of client.
    2. Dip proper Gal-out medicine water with a small blade make-up cotton and stick to the roll gear of the Gal-bar, coinstantaneous spread proper Gal-out medicine water on the client’s face.
    3. Place the Gal-bar on the client’s forehead, press the button to “+” mark and turn on power, the machine is ready for Gal-out work.
    4. It will take 4-6 minutes operating time.
    5. The Gal-in operation is same as the Gal-out operation. (note: Gal-in operating should press the button to “-” mark.).
    6. After over the operation, first turn off power then remove the G-al-bar from the client’s face.

  1. Caution:
    1. Remove all the decorations on body before operation.
    2. If used Gal-in/out medicine water has a mark to show its polarity, should obey to operate.
    3. When operate face, keep the energy lever with 1 MA currency (light becomes green.).
    4. In the operation, if the client has gently sting feeling, it is normal.
    5. To the sensitive skin, re-do Gal-in operation again with using distilled water to calm skin.
    6. After over the operation, used electrodes should be cleaned and dry storage.

  1. High-Frequency
    1. Function:
    2. Use special Ultraviolet rays intensity to treat the skin that sterilize the skin and accelerate wound healing.
    3. To get rid of spots, pigmentation, pimples and acne.

  1. Instruction Procedure:
  1. Insert the Ozone electrode into the handle and keep touch well.
  2. Connect the plug to the power outlet then turn on the machine.
  3. Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.
  4. After over the operation, turn the button of energy lever to “O” mark and turn off power, pull out the electrode and clean well and dry storage.

  1. Caution:
  1. Take off all metal decorations (earrings, necklace etc.) before operation.
  2. During the operation, not to stay too long time in a treated area to avoid scars.
  3. After over the operation, used electrodes should be cleaned and dry storage.

  1. Vacuum & Spray
  2. Function:
  3. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
  4. To make the suction/spray medicine water to spray as mist to nourish and calm skin.

  1. Instruction Procedure:
  2. Connect small suction glass tube to the suction/spray hose, put the hose to the suction port of machine, press the small hole on the small glass tube, then machine is ready for suction operation.
  3. Connect spray bottles to the suction/spray hose, put the hose to the spray port of machine, press the small hole on spray bottle then the machine is ready for spray like mist.

  1. Caution:
  2. There are three types of glasses of which should be used separately according to any specific parts of the body.
  3. After over the operation, used glass tubes should be cleaned and sterilized and dry storage.

  1. Remove Spot
    1. Function

Remove spot & tattoo


  1. Instruction Procedure
    1. Insert the pin into the handle.
    2. Clean the treat area with alcohol then spread it with anesthetic 3 minutes.
    3. Turn on the machine and ready for operation.
    4. When operating, care the currency lever and adjust a proper energy lever to avoid hurt.
      • Spot:special care to test and analysis spot’s conditions, some spots on the surface of skin but some spots in the deep under skin issue. If spot small, might remove it one time, if spot big and pigments deposits deep, should remove it 2-3 times. Don’t cut through and break the spot’s surface one time, should burn and remove with small frame way. To spot in the deep under skin, should spread proper cell cream on it before the wounded cure well 2~3 days, to avoid inflammation or skin hollow happen. When spread the cream, if the wounded inflame, don’t spread it.


  • Caruncle:gently touch the end with pin and kill the caruncle cell, later about 6-7 days, the caruncle drops. If the caruncle is too big, should remove it several times and not finish it in one time to avoid the wounded covers bad.


  • Tattoo: ordinary tattoo area is big, should choose #3 big bin and treat several times, remind not finish treatment. Otherwise, the wounded area is very easy to be inflamed, if happen, should take the sick to hospital to treat soon.


  1. Caution
    1. The pin should be sterilized before use.
    2. Beautician should keep the handle balance not shake to avoid burning the wounded



Leave a Reply

Your email address will not be published. Required fields are marked *