top

B-333 Body Shaping System Manual

panel-description

Body Shaping System has 10 paths pulse ports which can connect 20 pieces of electrode pad to different areas of the body, with 6 unique function key and 12 groups set computer programs inside. No matter reduce fatness, slimming, exercise breast, the beauticians now can operate it free to meet the customer's different demands. If to the customer with special demands, beauticians also can set the computer programs over 100 types by own to operate those special demands.

 

Panel Description:

1: Start/Pause 2,3: Work / Stop Indicator
4: Speed 5,6,7: Speed Shown (3 Models)
8: Error Warning Indicator 9: Timer Display
10,11: Time Up / Down 12: Program Select
13-16: Program Shown (P1; P2; P3; P4) 17: Auto Program
18: Auto Indicator 19-28: Min—Max Adjuster
29-38: Output Port 39: Cable Input
40: Fuse 41: Power ON/OFF
42: 220/110V Change Button  


Instruction:

  1. Before the operation, first set the 220/110V interchange button to fit your local voltage, (for example local 110V voltage, set the machine to 110V through adjusting and set the 220/110v interchange button, against 220V, same set way.).
  2. Connect the machine to your local voltage, turn on the machine, at this moment, the timer shown 30 minutes set.
  3. According to operating demands, adjust the timer to the right work time. The max work time is 60 minutes. (if one of the mix-max button or all doesn’t be off, the machine is to have a warning voice, should turn off all mix-max buttons and wait 5 minutes, the warning voice stop).
  4. Press select key to choose one program from P1 to P4, or press auto key and machines auto set the programs.
  5. Press the speed key to choose and get the right output energy.
  6. Insert the machine and put the electrode pads on the treating area, two different electrode pads in the same group should put on body symmetrical within 5 cm range, wrap with a bandage. (warning: always don’t put the paddle on the heart area.).
  7. Press start/pause key, ready to operate.
  8. Adjust mix-max button to get suitable output energy on each path.
  9. After the operation, turn off the machine.

Program Description:

P1: to fit muscle release and remove muscle ache and pain, work as skin massage.

P2: to fit breast area, muscle on legs and arms string, and buttocks and udders upgrade.

P3: to fit bionic movement (string drooping muscle, burn extra fatness).

P4: to fit reduce fatness, remove extra fatness cells through high intensional massage operation, to get the slimming body.

Note: when choosing one program, the microcomputer inside the machine will auto adjust the speed of operating to get the best effect according to the set program.

Specification:

Volt. Power Hz. Temp. G.W. Size
220/110V 40W 50/60Hz. 5-40˚C 5.8kg 47*39*22cm

 

Electrode Pad Location:

(Note: the same number consists of the same group of electrode pad)

 

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *