B-2003 Body Shaping System Manual
B-2003 Body Shaping System Manual

 

Body Shaping System, has 10 paths pulse ports which can connect 20 pieces of electrode pad to different areas of body, with 6 unique function key and 12 groups set computer programs inside. No matter reduce fatness, slimming, exercise breast, the beauticians now can operate it free to meet the customers different demands. If to the customer with special demands, beauticians also can set the computer programs over 100 types by own to operate those special demands.

 

 

Panel Description:

1: Start/Pause 2,3: Work / Stop Indicator
4: Speed 5,6,7: Speed Shown (3 Models)
8: Error Warning Indicator 9: Timer Display
10,11: Time Up / Down 12: Program Select
13-16: Program Shown (P1; P2; P3; P4) 17: Auto Program
18: Auto Indicator 19-28: Min—Max Adjuster
29-38: Output Port 39: Cable Input
40: Fuse 41: Power ON/OFF

 

Instruction:

  1. Before the operation, first to set 220/110V interchange button to fit your local voltage, (for example: local 110V voltage, set machine to 110V through adjust and set the 220/110v interchange button, against 220V, same set way.).
  2. Connect the machine to your local voltage, turn on the machine, at this moment, the timer shown 30 minutes set.
  3. According to operating demands, to adjust timer to a right work time. The max work time is 60 minutes. (if one of mix-max button or all doesn’t be off, the machine is to have warning voice, should turn off all mix-max buttons and wait 5 minutes, the warning voice stop).
  4. Press select key to choose one program from P1 to P4, or press auto key and machines auto set the programs.
  5. Press speed key to choose and get right output energy.
  6. Insert the machine and put the electrode pads on the treating area, two different electrode pads in same group should put on body symmetricalor within 5 cm range, wrap it with bandage. (warning: always don’t put the paddle on heart area.).
  7. Press start/pause key, ready to operate.
  8. Adjust mix-max button to get suitable output energy on each path.
  9. After over the operation, turn off the machine.

Program Description:

P1: to fit muscle release and remove muscle ache and pain, work as skin massage.

P2: to fit breast area, muscle on legs and arms string, and buttocks and udders upgrade.

P3: to fit bionic movement (string drooping muscle, burn extra fatness).

P4: to fit reduce fatness, remove extra fatness cells through high intensional massage operation, to get slimming body.

Note: when to choose one program, the microcomputer inside machine will auto adjust the speed of operating to get best effect according to set program.

Warning: before operation, always first to check the 220/110V interchange button of machine to see if it fits your local voltage.

Specification:

Volt. Power Hz. Temp. G.W. Size
220/110V 12W 50/60Hz. 5-40˚C 5.8kg 47*38*20cm

Accessory List

Name Number Note
Electrode piece (big) 10  
Electrode piece (small) 10  
Elastic (wide) 1  
Elastic (short) 13  
Electrode wire (purple) 12  
Black stick piece/since patch 2  
Breast enhancement electrode (red) 2  
power cord 1  
Warranty terms 1  
manual 1  

Electrode Pad Location:

 

 

(Note: same number consists of same group of electrode pad)

 

Note: B-2003 is without cabinet

B-2003A is a cabinet;

Leave a Reply

Your email address will not be published. Required fields are marked *